Home > Sheet and Plates > Stainless Steel 420 Sheet and Plates
Adam Stainless is a well-respected manufacturer and supplier located in Canberra, Australia, focusing on high-quality Stainless Steel 420 Sheets and Plates. These products are celebrated for their impressive strength, resistance to corrosion, and long-lasting durability, making them perfect for a variety of industrial needs. Adam Stainless takes pride in their precision manufacturing, following international standards for surface finish, thickness, and tolerance. The Stainless Steel 420 Sheets and Plates are highly regarded for their outstanding mechanical properties and performance in high-stress situations, which makes them a go-to choice for industries like manufacturing, engineering, construction, and automotive, both in Australia and beyond.
Stainless Steel 420 Sheets and Plates are martensitic stainless steels that mainly consist of 12–14% chromium, 0.15% carbon, along with trace amounts of manganese, silicon, and phosphorus. This unique blend gives them good corrosion resistance and impressive hardness after heat treatment. In terms of mechanics, they boast a tensile strength ranging from 650–850 MPa, along with excellent wear resistance and moderate impact toughness. Their high hardness and strength make them perfect for environments that require resistance to abrasion and mild corrosion, while still being ductile enough for fabrication and machining tasks.
Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| 420 | 0.15 max | 1.00 max | 1.00 max | 0.04 max | 0.03 max | min: 12.0 max: 14.0 | – |
| Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Brinell (HB) |
|---|---|---|---|---|
| Annealed * | 655 | 345 | 25 | 241 max |
| 399°F (204°C) | 1600 | 1360 | 12 | 444 |
| 600°F (316°C) | 1580 | 1365 | 14 | 444 |
| 800°F (427°C) | 1620 | 1420 | 10 | 461 |
| 1000°F (538°C) | 1305 | 1095 | 15 | 375 |
| 1099°F (593°C) | 1035 | 810 | 18 | 302 |
| 1202°F (650°C) | 895 | 680 | 20 | 262 |
Contact us to get a quick quote for your requirement.
These are stainless steel 420 hot rolled sheets that can offer excellent corrosion resistance and a durability that no other material could. They range from 3mm to 12mm thickness and are most suitable for any application that calls for high strength and good machinability.
Stainless Steel 420 cold rolled plates offer excellent corrosion resistance and a bright finish. These plates are available in thicknesses ranging from 0.5mm to 6mm and are used in precision applications where dimensional accuracy and fine surface finish are critical.
Stainless Steel 420 chequered plates combine excellent corrosion resistance with a textured surface for slip resistance. They are available in thicknesses from 2mm to 8mm and various patterns, and are widely used in flooring and safety applications.
Stainless Steel 420 perforated sheets are corrosion-resistant and have uniform holes for ventilation and aesthetics. They are available in thicknesses from 1mm to 5mm and are used in filtering and architectural applications.
Stainless Steel 420 shim sheets are very corrosion resistant and precise. Generally available in the thickness of 0.1mm to 1mm, these are used for precise spacing and alignment in many engineering and manufacturing applications.
Stainless Steel 420 polished plates have excellent corrosion resistance and a reflective finish. Available in thicknesses ranging from 1mm to 10mm, they are used for decorative and high-visibility applications where aesthetic quality and resistance to oxidation are critical.
Adam Stainless is highly concerned with the customer experience and delivers that with adequate documentation of its premium-quality Stainless Steel 420 Sheets and Plates. We deliver to our clients the necessary documents like a commercial invoice, packing list, fumigation certificate, heat treatment chart, quality assurance plan, and NABL-approved lab test report. These documents validate the genuineness and superior quality of our products and, therefore, ensure confidence in our valued customers. In addition, we provide our Stainless Steel 420 Sheets and Plates with different test certificates, including MTC according to EN 10204/3.1b, PMI Test Certificate, 100% radiography test report, and Third Party Inspection Certificate, reflecting our customer-first approach and dedication to excellence.
These Stainless Steel 420 Sheets and Plates are commonly found in applications that demand high hardness and corrosion resistance. You’ll often see them in cutlery, surgical instruments, valve components, pump parts, and various types of industrial machinery. In the automotive industry, they’re used for trim, fasteners, and structural components. Additionally, these sheets and plates are ideal for chemical processing equipment, molds, and dies where strength and polishability are essential. Thanks to their excellent wear resistance and ability to maintain sharp edges, they are widely utilized in both domestic and industrial knife manufacturing.
©2024 Adam Stainless All Rights Reserved.
