Adam Stainless is a top provider of stainless steel 201 fasteners in Canberra, providing cost-effective solutions for general-purpose use. The fasteners provide fair strength with moderate resistance to corrosion, hence proper for less severe environments. Adam Stainless’s attention to detail provides consistent quality, accurate dimensions, and superb surface finish. Produced from high-quality raw materials, 201 fasteners provide value-for-money performance to customers requiring trustworthy fasteners for structural, aesthetic, and light industrial purposes.
Grade 201 is made up of 17–19 % chromium, 4–6 % nickel, 7–8 % manganese, and ≤0.15 % carbon. It offers tensile strength approximately 520–620 MPa, yield strength 275–310 MPa, and elongation 35–45 %. The alloy possesses moderate corrosion resistance, high toughness, and fair formability, possessing strength similar to 304 at a lower price.
| Element | 201 |
| Carbon | 0.15 |
| Chromium | 16.0-18.0 |
| Nickel | 3.5-5.5 |
| Manganese | 5.50-7.50 |
| Silicon | 1.00 |
| Nitrogen | 0.25 |
| Phosphorus | 0.060 |
| Sulfur | 0.030 |
| Property | 201 |
| Yield Strength, min. (ksi) | 45 |
| Tensile Strength, min. (ksi) | 95 |
| Elongation, min. (%) | 40 |
| Hardness, max. (Rb) | 100 |
Contact us to get a quick quote for your requirement.
Stainless Steel 201 Nuts offer moderate corrosion resistance and are ideal for applications where mild corrosion is expected. They come in various sizes, typically from M2 to M30, and are used to secure bolts and screws in assemblies.
These stud bolts provide good strength and moderate corrosion resistance, making them suitable for use in less aggressive environments. They are available in lengths ranging from 10 mm to 200 mm and diameters from M6 to M30. They are also used in bolted joints.
Stainless Steel 201 Bolts exhibit moderate resistance to corrosion, making them suitable for indoor and mild outdoor applications. They come in sizes ranging from M4 to M24 and lengths from 10 mm to 150 mm, which is ideal for various fastening needs.
Offering moderate corrosion resistance, Stainless Steel 201 threaded rods are used in various industrial and construction applications. They are available in diameters from M6 to M30 and lengths from 100 mm to 1000 mm, suitable for threaded connections.
Stainless Steel 201 screws provide moderate corrosion resistance and are used in applications where some exposure to moisture is expected. They come in sizes ranging from M2 to M20 and lengths from 5 mm to 100 mm, suitable for various fastening needs.
These washers offer moderate corrosion resistance and are used to distribute the load of a bolt or nut. They come in sizes from M4 to M30 and various thicknesses, used to prevent damage to the surface being fastened and ensure a secure fit.
We currently focus on providing 100% smooth customer service with the Stainless Steel 201 Fasteners. All the necessary documentation such as a commercial invoice, packaging list, fumigation certificate, heat treatment chart, and quality assurance plan is attached to the NABL-approved lab test report. All these documents prove authenticity and substantiate the superior quality of all our fasteners to give our precious clients confidence in their performance and reliability for a variety of industrial applications.
201 fasteners are applied in household appliances, architectural hardware fittings, furniture, and light structural assemblies. They are suitable for mildly corrosive situations and provide surface attractiveness for ornamental installations. Adam Stainless’s 201 fasteners are selected for economical operation where light corrosion resistance is not vital but mechanical strength and appearance are important.
©2024 Adam Stainless All Rights Reserved.
